Functions 8000-MVS 1 Chapter

Multi Program 2

Overview

What is Multi Program 2?

By operating the switcher in Multi Program 2 mode, a single switcher mix/ effects bank can be used to create two separate video outputs, referred to as “main” and “sub.” You can set backgrounds, keys, and transitions for each of main and sub. Keys 2 to 4, however, are common to main and sub.

For example, immediately after a score in baseball two versions of the scene can be provided as shown below, and switched simultaneously.

 

Key 3

 

Background A

Background A

(signal from utility 2 bus)

 

TEAM B

TEAM A

 

Key 1

Background B

Background B

(signal from utility 3 bus)

 

Program output for “Main”

Program output for “Sub”

Note

The Multi Program 2 function is only supported on the MVS-8000A/8000G. To enable this function requires the BZS-8200 Multi Program 2 software. Depending on the CPU module, this function may not be supported. For details, consult your Sony service representative or sales representative.

Using the software

To use the Multi Program 2 software, you are required to enter an install key which validates the software. (If the software has been factory installed, the install key is not required.)

230 Multi Program 2