Still Image Operations
Press [Record Enable], turning it on.
5
For details of the operating procedures, see “Selecting outputs (FM) and target frame memory” (page 495).
3 To use V/K mode, press [V/K Mode], turning it on.
4 Press a button in the frame memory folder selection area, to select the folder to hold the freeze image.
For details of the selection method, see page 496.
Note
The folder selected here is the destination folder for writing the freeze image.
It is not possible to change the selection of this folder after the following step 5.
An orange bar appears on the selection button for the destination folder.
Select the desired frame memory.
2
This fixes the currently selected frame memory output image. To release the lock, set [Lock] to off.
Continuously Capturing Still Images (Record)
Continuously freezing input images and writing to memory
1 In the Frame Memory menu, select VF1 ‘Still’ and HF4 ‘Animation Record.’
The Animation Record menu appears.
Press [Lock], turning it on.
3
In the frame memory selection area, select the FM output. (See page 495.)
2
Fixing the output image selection (lock function)
1 In the Frame Memory menu, select VF3 ‘Reposition/Lock’ and HF2 ‘Lock.’
The Lock menu appears.

Memory Frame 7 Chapter

508