1 In the Frame Memory menu, select VF6 ‘External HDD’ and HF2 ‘Backup/Restore.’
The Backup/Restore menu appears.
If in Dual Simul mode, select the switcher to operate (see page 532).
To get the hard disk drive information
Press [Refresh Status].
The Model Name item shows the product information for the hard disk drive, and the names of directories within the logical drives.
2 Using any of the following methods, select a logical drive (FMHDD1 to FMHDD5).
•Press directly on the list to select.
•Press a button in the <Partition> group.
•Turn the knob.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Partition | Logical drive selection | 1 to 5 |
|
|
|
|
3 Press [Backup].
A popup window for confirming file saving appears.
Note
When you save the files, all of the saved files in the logical drive is erased immediately before the saving operations.
4 Press [Yes].
This starts the file saving operation. If there is no directory in the logical drive, a directory is automatically created, and the files are saved within it. A progress bar and numerical indication appear to show the progress of the operation.
When the operation is completed, a popup window reading “Completed.” appears.
5 Press [OK].
To rename a directory
Select a directory in the list, and in the button area press [Rename].
In the keyboard window that appears, enter the new directory name, and press [Enter]. The name of a directory is limited to eight characters.
Note
The following names cannot be used:
534 External Hard Disk Drive Access