•“Memory Stick PRO”

•“Memory Stick Duo”

•“Memory Stick PRO Duo”

Notes

•When using a “Memory Stick PRO,” high-rate data transfer using parallel interface is not supported.

•A “MagicGate Memory Stick” can also be used, but this system does not support the MagicGate function.

•When using a “Memory Stick Duo,” be sure to use it with a “Memory Stick Duo Adaptor” (MSAC-M2 or equivalent). If you insert a “Memory Stick Duo” without using the adaptor, there is the possibility that the stick cannot be removed, resulting in a serious accident.

Handling “Memory Sticks”

When using “Memory Sticks,” pay attention to the following points.

•Do not touch the connector of the “Memory Stick” with anything, including your finger or metallic objects.

•Do not attach anything other than the supplied label to the “Memory Stick” labeling position.

•Attach the label so that it does not stick out beyond the labeling position.

•Carry and store the “Memory Stick” in its case.

•Do not strike, bend, or drop the “Memory Stick.”

•Do not disassemble or modify the “Memory Stick.”

•Do not allow the “Memory Stick” to get wet.

•Do not use or store the “Memory Stick” in a location that is:

–Extremely hot, such as in a car parked in the sun

–Under direct sunlight

–Very humid or subject to corrosive substances

Panel Control and Menus 2 Chapter

Names and Functions of Parts of the Control Panel 297