To save and recall these registers, use the Flexi Pad control block in each switcher bank or the Menu control block. (See “DME Wipe Snapshots” (page 482).)

In the case of a simple transition system, there are eight DME wipe snapshot registers for each switcher bank.

DME Wipe Modify Clear

By a simple operation, you can return the DME wipe state to that set in initial status.

For details of the menu operation to return the DME wipe state to that set in initial status, see “Returning to default state in function groupings” (page 324).

Resizer DME wipes

Using the resizer, you can carry out key DME wipes.

Note

This function is supported by the MVS-8000G.

DME wipe patterns available for resizer DME wipe

You can use the following patterns of the DME wipe pattern one-channel mode that can be used in a resizer DME wipe. (7000-series numbers)

•Slide (pattern numbers: 7001 to 7008)

•Squeeze (pattern numbers: 7021 to 7031)

•frame in-out (pattern numbers: 7201 to 7208, 7221 to 7224)

Relation between resizer DME wipes and other effects

The following relations hold between resizer DME wipes and other effects.

Relation with processed keys

It is not possible to select a resizer DME wipe for a key for which processed key is enabled.

Relation with resizer

A resizer DME wipe cannot be used for a key for which resizer is enabled. Additionally, a resizer DME wipe cannot be used for a key paired with a key for which the dual resizer effect is enabled. Paired keys refer to the

DME Wipes 83