Panel Control and Menus 2 Chapter

mode, then the description names appear here.

cDEST (destination) button

Press this button, turning it on, to display the names of the destinations assigned to the destination selection buttons in the selected source name displays.

dSelected destination display This shows the name of the destination selected by the destination selection buttons. If a protected destination is selected, the indication “PROTECT” appears.

eSource selection button rows

The destination selected with a destination selection button is assigned to a source selection button. Press a source selection button to select a source. The 1st row of buttons are source selection buttons for the unshifted destinations, and the 2nd row are shifted source selection buttons. By holding down the [2ND] button, and selecting a destination, you can assign a different destination from the 1st row to the 2nd row. In the 1st row, the button to which a destination is assigned lights amber. If a different destination is assigned to a button in the 2nd row, the button lights green. When the 32nd button is set as a [SHIFT] button (in a 32-button system), while the [SHIFT] button is active, these switch to the shifted source selection buttons. By using the [KEY] button, you can expand the source selection as follows.

Source

[SHIFT]

[KEY]

Selection

selection

 

 

operation

 

 

 

 

1 to 31

Off

Off

Press the source

 

 

 

selection button.

 

 

 

 

32 to 62

On

Off

Press the

 

 

 

[SHIFT] button,

 

 

 

then press the

 

 

 

source selection

 

 

 

button.

 

 

 

 

Source

[SHIFT]

[KEY]

Selection

selection

 

 

operation

 

 

 

 

63 to 93

Off

On

Hold down the

 

 

 

[KEY] button,

 

 

 

and press the

 

 

 

source selection

 

 

 

button.

 

 

 

 

94 to 124

On

On

Hold down the

 

 

 

[KEY] button,

 

 

 

and press the

 

 

 

[SHIFT] button,

 

 

 

turning it on (the

 

 

 

[SHIFT] button

 

 

 

locks here, even

 

 

 

when in Hold

 

 

 

mode), then

 

 

 

press the source

 

 

 

selection button.

 

 

 

 

fXPT HOLD (cross-point hold) buttons

Not used in router control mode.

gKEY button

When this button is enabled by a setting in the Setup menu, by holding it down during a source selection you can expand the function of the [SHIFT] button. (See “Expanding the shift function” in Chapter 16 (Volume 2).)

h2ND button

After selecting a destination with the destination selection buttons, hold down this button and make another destination selection to assign a different destination from the 1st row to the 2nd row.

iSource name displays

These display the names of signals (sources) that can be selected with the cross-point buttons. While the [SHIFT] button is active, the shifted signal names appear. While the [KEY] button is held down, the expanded signal names appear. When a different destination is assigned to the 2nd row, the 2nd row signal names

292 Names and Functions of Parts of the Control Panel