Operating manual
6.5.4Point of view
It is used to select the point of view on 3D graphics.
The orientation of the graphics may be directly selected at the graphic window by orienting the XY plane and the Z axis. The XY plane may be rotated 360º and the Z axis 90º. The figure at the lower
Keys for selecting the point of view
To orient the XY plane.
To orient the Z axis.
To validate and display the selected point of view.
To cancel the selected point point of view.
When selecting this option, the softkey menu shows the options available for selecting the point of view. To return to the main menu, press the key for the previous menu.
Point of view "Edit"
It is used to manually edit the orientation of the axes of the graphics. It is edited in the dialog area of the graphic window that shows the current orientation of the axes.
Keys for defining the point of view
To move the cursor through the data.
6.
| Graphic window (softkeys) |
To validate and display the defined point of view.
To cancel the defined point of view.
CNC 8070
(SOFT V03.0X)
121
