Operating manual
3.
AUTOMATIC MODE | Graphic screen (softkeys) |
Option "Print setup"
It is used to set the printing configuration.
When selecting this option, the CNC shows a dialog box where the following may be defined:
A. The title of the graphics that will appear next to it in the print.
B. The name of the file where the graphics will be stored when printing out to a file.
Print configuration
A
B
To move the cursor through the elements of the list.
To accept the configuration defined.
To cancel the defined configuration.
After filling out the data, press [ENTER] to accept them or [ESC] to cancel them.
3.5.9Real coordinates
It is used to draw the real tool path or the theoretical tool path. This option is only available in line type graphics.
When selecting this option (the softkey will appear pressed), the CNC draws the actual (real) tool path.
CNC 8070
(SOFT V03.0X)
56
