Fagor America CNC8070 manual Editing the message and error table, Messages, Errors

‡ ‡ ‡ Operation manual

11.

PLC	service
	"Messages"

11.13.2 Editing the message and error table

Messages

To add a new message to the table, press the "New message" softkey. The CNC adds a new row to the table and it identifies it with the label -MSG-, indicating that it corresponds to a message.

To edit or modify the table data, use the cursor to select the cell whose value is to be changed and define the data as follows:

•The number and text of the message is entered directly from the keyboard.

•The "show" option is turned on and off with the [SPACE] key.

•The file for additional information may be entered directly or may be selected with the "Select Info" softkey.

Keys for defining the data of the logic analyzer

To move the cursor to the upper, lower, left or right cell.

To move the cursor to the beginning / end of the row.

To move the cursor to the beginning/end of the column.

Press [ENTER] every time a data is edited to accept the new value or [ESC] to cancel it.

To delete a message from the table, select it with the cursor and press the "Delete" softkey.

Errors

To add a new error to the table, press the "New error" softkey. The CNC adds a new row to the table and it identifies it with the label -ERR-, indicating that it corresponds to an error.

To edit or modify the table data, use the cursor to select the cell whose value is to be changed and define the data as follows:

•The number and text of the error are entered directly from the keyboard.

•The "show" option and the file for additional information cannot be edited.

Press [ENTER] every time a data is edited to accept the new value or [ESC] to cancel it.

To delete an error from the table, select it with the cursor and press the "Delete" softkey.

8070 CNC

(SOFT V03.0X)

250