Operating manual
8.5.2Save and recall tables
Saving a table
It may be used to save the table data, in ASCII format, in a file.
After selecting the table whose data is to be saved, press the SAVE icon and the CNC shows a list with the tables that are already saved.
Keys for selecting a data file
To switch windows.
To close and open a folder submenu.
To move the cursor thru the elements of the window.
To save the new program.
To cancel the selection and close the programs listing.
To save the table data, proceed as follows:
1.Select the destination folder.
2.Define the file name at the bottom window. To replace an existing file, select it from the list.
3.Press [ENTER] to save the file or [ESC] to return to the table without saving the file.
Depending on the table being saved, the CNC will assign one of the following extensions to the file:
Extension | Table type |
|
|
*.UPO | Zero offset table. |
|
|
*.UPF | Fixture table. |
|
|
*.UPP | Parameter tables. |
|
|
Recall a table
It may be used to restore the table data, in ASCII format, from a file.
After selecting the table whose data is to be restored, press the LOAD icon and the CNC shows a list with the tables that are already saved.
To recover the table data, proceed as follows:
1.Select the folder containing the file.
2.Select the file from the list or write its name in the bottom window.
3.Press [ENTER] to recall the data from the file or [ESC] to return to the table without recalling the data.
8.
USER TABLES | Operations with tables |
CNC 8070
(SOFT V03.0X)
169
