Operating manual
6.9.6Defining any profile
To define a new profile, the CNC request the starting point of the profile. Define it with the relevant softkeys and press the "Validate" softkey. The graphic area will show the profile's starting point.
Once the profile's starting point has been defined, the softkey menu will show the necessary options to define the profile. To return to the main menu, press the key for the previous menu.
Straight
To edit a straight section.
Clockwise arc
To edit a clockwise arc.
Counterclockwise arc
To edit a counterclockwise arc.
New profile
To edit a new profile.
| Modify the last one |
| For modifying the last section of the profile. |
| Definition of a straight section |
|
|
| To define a straight section, the softkey menu shows the necessary options to define |
| the data for the section. |
X Y | To define the section's end point. |
Angle | To define the angle of the straight section with the abscissa axis. |
Tangency | To define whether the section is tangent to the previous path. |
Validate | To accept and draw the defined section. |
| The data is defined in the data area of the screen where the following information is |
| shown: |
X1, Y1 | Coordinates of the section's starting point. They cannot be modified because they |
| belong to the endpoint of the previous section. |
X2, Y2 | Coordinates of the section's endpoint. |
ANGLE | Angle of the straight section with the abscissa axis. |
TANGENCY | It indicates whether or not the section is tangent to the previous path. |
6.
Profile editor | |
EDITING |
|
CNC 8070
(SOFT V03.0X)
141
