![](/images/new-backgrounds/1111071/111071137x1.webp)
Operating manual
3.1.1Description of the screens
As mentioned earlier, the automatic mode may consist of one or several of the following screens (later sections of this chapter describe each one in further detail).
Data screen
They show execution related data: axis position, "M" and "G" function history, active tool and tool offset, spindle speed and axis feedrate.
When this screens shows a window with the program selected for execution, it will be possible to select the execution starting and ending conditions as well as to recover the program history up to a particular block.
Information on program execution.
Graphic screen
It shows a graphic representation of the program during execution. It also allows taking measurements on the graphics.
3.
AUTOMATIC MODE | Displaying the automatic mode |
Graphic representation of the execution of the program.
CNC 8070
(SOFT V03.0X)
35