
Operation manual
11.11"Cross references" service
11.
PLC | service |
| "Cross references" |
8070 CNC
(SOFT V03.0X)
The "Cross references" service may be used to obtain information about the PLC resources being used in the PLC project.
Pressing the "Show" softkey accesses the window of this service. To close the cross- reference window, press [ESC].
Description
The screen of this service looks like this:
ABCD
A. Name of the resources being used by the PLC project.
B. File of the PLC project where the resource is being used.
C. Line, within the file, containing the resource.
D. How the resource is being used.
For the inputs, outputs, marks and registers:
?The resource is used as a consultation.
=The resource is used as an action.
For the timers.
TG | Timer trigger. |
T | Status consultation. |
TEN | Enable input. |
TRS | Reset input. |
For the counters. | |
C | Status consultation. |
CPR | Counter preset. |
CEN | Enable input. |
CUP | |
CDW | Countdown input. |
244