ABOUT THIS MANUAL
Title
Operating Manual.
Type of documentation
Description and operation of each table, windows and work modes of the CNC.
Internal code
It is part of the manual directed to the end user. The code of the manual depends on the software version
CNC 8070 | USER (IN) STAN | Code 03753611 |
CNC 8070 | USER (IN) AVANZ | Code 03753631 |
Version
It corresponds to the software version: (Soft V03.0x).
Start-up
Verify that the machine that integrates this CNC meets the 89/392/CEE Directive.
Before starting up the CNC, read the instructions of chapter 1 in the
Installation Manual.
Warning
The information described in this manual may be changed due to technical modifications.
FAGOR AUTOMATION, S. Coop. reserves the right to make any changes to the contents of this manual without prior notice.
CNC 8070
(SOFT V03.0X)
I