
Operation manual
11.10.3 Options of the "Monitoring" service (softkeys).
When accessing the "Monitoring" option of the softkey menu, the following options will be available.
Save set
It is used to save the set of defined resources into a file.
When selecting this option, the CNC displays a window with the list of the files (.MON) currently saved. To save a set of defined resources:
1.Define the file name at the bottom window. To replace an existing one, select it from the list.
2.Press [ENTER] to save the program or [ESC] to cancel the selection and close the program listing.
Load set
It is used to recover the set of resources previously saved into a file.
When selecting this option, the CNC shows a window with the list of available files. To load one of these files:
1.Define the file name at the bottom window or select it from the list.
2.Press [ENTER] to load the selected file or [ESC] to cancel the operation and close the program listing.
Binary
It toggles between displaying the register values in decimal and hexadecimal format or only in binary.
Visibility
It shows or hides certain resource tables.
Add row
It increases the size of the active window (where the cursor is) by adding a file to it.
To move the cursor through the active tables.
Remove row
It decreases the size of the active window (where the cursor is) by removing a row from it.
To move the cursor through the active tables.
Data input
It selects the data entry area.
Clear all
11.
PLC | service |
| "Monitoring" |
8070 CNC
It deletes all the resources from the tables.
(SOFT V03.0X)
243