Fagor America CNC8070 manual Editing window, Description of the editing window

‡ ‡ ‡ Operating manual

6.2Editing window

It may be used to edit, modify or see the contents of a part-program and check the program for syntax errors.

Description of the editing window

The editing window shows the following information:

A

B

C

D

A. Title bar

Name of the program selected for editing. It also indicates whether it is a read- only program or not (if read-only, while simulating or executing).

An "*" next to the program means that the program has been modified since last saved (only if automatic program saving is off).

B. Edit area.

Program editing area showing its contents.

C. Editing errors (if any).

List of errors occurred while editing the program or syntax errors found in the syntax check.

D. Status bar.

Information about cursor position and the status of the editor options such as:

AUTONUM: Automatic block numbering. When active, the CNC automatically

	numbers the new blocks being generated.
CAP:	Capital letters. When active, the text is always written in capital
	letters.
OVR:	Overwrite text. It toggles between overwriting and inserting text.
	When active, it overwrites the existing text.
NUM:	Numeric keypad active.

6.

-SIMULATION MODE	Editing window
EDITING

CNC 8070

(SOFT V03.0X)

97