Operating manual
12.
MACHINE PARAMETERS | Operations with tables |
CNC 8070
12.3.2 Save and recall tables
Saving a table
It may be used to save the table data, in ASCII format, in a file.
Use the softkey menu to select the table whose data is to be saved. If no table is selected, all the data of all the tables will be saved.
After selecting the table whose data is to be saved, press the SAVE icon and the CNC shows a list with the tables that are already saved.
Keys for selecting a data file
To switch windows.
To close and open a folder submenu.
To move the cursor thru the elements of the window.
To save the new program.
To cancel the selection and close the programs listing.
To save the table data, proceed as follows:
1.Select the destination folder.
2.Define the file name at the bottom window. To replace an existing file, select it from the list.
3.Press [ENTER] to save the file or [ESC] to return to the tables without saving the file.
The files are saved with the extension *.MP.
Recall a table
It may be used to restore the table data, in ASCII format, from a file.
Use the softkey menu to select the table whose data is to be recalled (restored). If no table is selected, all the data of all the tables will be recalled.
After selecting the table whose data is to be restored, press the LOAD icon and the CNC shows a list with the tables that are already saved.
To recall the table data, proceed as follows:
1.Select the folder containing the file.
2.Select the file from the list or write its name in the bottom window.
3.Press [ENTER] to recall the data or [ESC] to return to the tables without recalling the data.
(SOFT V03.0X)
