
Operating manual
3.
AUTOMATIC MODE | Data screen (softkeys) |
CNC 8070
3.3.3Block search
With this option, it is possible, in a program or subroutine, to set the last block in order to recover the program history and resume program execution from that point on with the same conditions as if it were executed from the beginning.
When recovering the program history, the CNC reads it up to the indicated block activating the "G" and "M" functions it reads along the way. Likewise, it sets the feedrate and speed conditions in the program and calculates the position where the axes should be.
When selecting this option, the softkey menu of the CNC shows the options available for selecting the stop condition. To return to the main menu, press the key for the previous menu.
Subroutine selection
To select the stop condition in a global subroutine which has been called upon from the program.
When selecting this option, the CNC shows a list of programs available for selecting the desired subroutine.
Keys for selecting a program
To switch windows.
To move the cursor thru the elements of the window.
To open the selected subroutine.
To cancel the selection and close the program listing.
To select a subroutine from the list.
1.Select the folder containing the subroutine.
2.Select the program containing the subroutine or write its name in the bottom window.
3.Press [ENTER] to open the program or [ESC] to cancel the selection and close the program listing.
The program window will show the contents of the selected subroutine.
Stop block
It sets as the last block for program history recovery the one currently selected with the cursor. If the program is executed next, it resumes at this block.
The last block may be selected using the cursor or the "Find text" or "Go to line" options of the softkey menu.
Keys to move the cursor
Moves the cursor line by line.
To move the cursor page by page.
Moves the cursor to the first block or to the end of the program.
(SOFT V03.0X)
44