Operating manual
9.2.3Description of the tool data
The tool data appears on the right panel of the tool table. It shows the data of the tool selected on the list.
This data must be defined by the user. When using tool life monitoring, the CNC is in charge of updating the value of the actual (real) life.
Configuring the tool data display
The data being shown may be configured from the vertical softkey menu.
When pressing this icon, the CNC shows a dialog box for selecting the data to be shown. To hide a data, cancel the relevant check box.
Keys to set the tool table
To move the cursor.
To activate/deactivate the selection box.
To accept the configuration defined.
To cancel the defined configuration.
Description of the tool data
The tool data is grouped as follows:
•Tool identification.
•Tool geometry.
•Tool monitoring.
•Information for the magazine.
•Custom.
•Comment.
Keys for selecting the table data
It selects the previous and next data of the same group.
It selects the first data of the previous or next group.
Tool identification
Information identifying the tool: number, name, family, number of tool offsets and status.
Tool number
It is assigned automatically when the tool is added to the list. This number may be changed if it is not in the magazine, in the spindle or on the tool changer arm.
The tool number may be any integer between 1 and 999999999; by default, it is assigned the first available value on the list.
When entering an existing tool number, the CNC displays the data for that tool.
9.
MAGAZINE TABLE | Tool table |
TOOL AND |
|
CNC 8070
(SOFT V03.0X)
181
