‡ ‡ ‡ Operating manual

10.

UTILITIES MODE

Utilities (Softkeys)

Machine parameters for kinetics

It is requested when trying to carry out the following actions in the machine parameter tables for the kinematics: If not set, it will apply the password used in the rest of the machine parameters.

Modifying the value of a parameter.

Initialize a table.

Loading a table.

How to set the protection passwords

Press the "Passwords" softkey to access the password setting screen. From this screen, it is possible to define, modify or delete the passwords. If this screen is protected, pressing the softkey will request the general password.

Each password may be up to 10 ASCII characters long. It is case sensitive.

Keys to set the password

To select the previous or next password.

It assumes the defined password.

To cancel the defined password.

It deletes the selected password.

The "Delete all" softkey deletes all the passwords defined.

CNC 8070

(SOFT V03.0X)

214

Page 248
Image 248
Fagor America CNC8070 manual How to set the protection passwords, Machine parameters for kinetics, Keys to set the password