‡‡ ‡ Operating manual

9.5Table for the status of the tool change process

This screen monitors the tool changes being executed in each channel.

9.

MAGAZINE TABLE

tool change process

TOOL AND

status of the

 

Table for the

It indicates the following for each tool change process:

The type of change selected and the magazine involved.

The type of change refers to the type of operation being carried out or to be carried out when executing function M06. The possible types of change are load a tool into the spindle or load and unload a ground tool from the magazine through the spindle.

The "execution " LED informs that the tool change process is running and that the magazine is carrying out an operation.

The "status" LED informs on whether the magazine is in an error state or not. To eliminate the error condition, press the reset softkey in the magazine table.

CNC 8070

(SOFT V03.0X)

192

Page 226
Image 226
Fagor America CNC8070 manual Table for the status of the tool change process