Operation manual
11.
PLC | service |
| "Logic analyzer" |
11.9.3 Execute and analyze trace
Execute trace / Stop trace
It used to start or stop the data capture to display the traces.
Analyze trace
It is used to analyze the different graphic aspects of the trace.
When selecting this option, the softkey menu shows the options available for analyzing the trace. To return to the main menu, press the key for the previous menu.
•Go to the beginning
It moves the indicator cursor and the current graphic view to the beginning of the trace.
•Go to the end
It moves the indicator cursor and the current graphic view to the end of the trace.
•Go to the time
It moves the indicator cursor and the current graphic view to the time value set by the operator with respect to the base point of the trace (starting point of the trace if there is no trigger or to the trigger point if there is one).
•Go to trigger
It moves the indicator cursor and the current graphic view to the trigger point.
•Go to reference
It moves the indicator cursor and the current graphic view to the reference point defined earlier.
•Set reference
It sets a reference point at the current cursor position for time difference calculation.
•Remove reference
Removes the reference point defined earlier.
Trace view / Edit view
It toggles between the graphic window and the data and display conditions area.
MS (milliseconds) / US (microseconds)
It toggles between milliseconds
It is used to print the graph on a printer connected to the CNC or as a BMP file in the CNC. When printing to a file, it is saved in the folder:
"C:\Cnc8070\Mtb\Plc\Watch\*.bmp"
8070 CNC
(SOFT V03.0X)
238
