Operating manual
9.1.2Search for a text in the tables
It is possible to search for a text or a value in the list of tools and magazine positions. The search is carried out from the vertical softkey menu.
This icon starts the search. Once the icon has been pressed, the CNC will display a dialog box to define the search criteria. The defined criteria is maintained until a new one is defined.
This icon is shown when a search criteria has been defined; it makes it possible to search for the next match using the current search criteria.
To start or resume the search, press [ENTER] and the focus will position on the first match found. Every time one of the icons is pressed, it offers the option to search for the next match or to define a new search.
The search may be canceled by pressing the [ESC] key.
Define the search criteria.
Every time one of these icons is pressed, it shows a dialog box to define the search criteria. The following may be defined in this dialog box:
•The text or value to search for.
•The beginning point of the search, namely either from the beginning of the table or from the cursor position.
Find text
9.
MAGAZINE TABLE | common operations |
TOOL AND | Showing tables and |
To move the cursor through the elements of the list.
It selects an option from a group.
To start the search.
To cancel the search and close the dialog box.
CNC 8070
(SOFT V03.0X)
173
