Operating manual
6.7.2Stop condition
It is used to establish, in the program or in a subroutine, the block where the program simulation will be interrupted. After executing that block, the simulation may be resumed with the [START] icon or canceled with the [RESET] icon.
START RESET
If no last block is established, the simulation of the program will end after executing one of the
When selecting this option, the softkey menu of the CNC shows the options available for selecting the stop condition. To return to the main menu, press the key for the previous menu.
Subroutine selection
To select the stop condition in a global subroutine which has been called upon from the program. When selecting this option, the CNC shows a list of programs available for selecting the desired subroutine.
Keys for selecting a program
To move the cursor thru the elements of the window.
To open the selected subroutine.
To cancel the selection and close the program listing.
To select a subroutine from the list.
1.Select from the list the program containing the subroutine or write its name in the bottom window.
2.Press [ENTER] to open the program or [ESC] to cancel the selection and close the program listing.
The program window will show the contents of the selected subroutine.
Last block
It sets the cursor position as the block where simulation is interrupted. If no last block is established, the simulation of the program will end after executing one of the end-
The last block may be selected using the cursor or the "Find text" or "Go to line" options of the softkey menu.
Keys to move the cursor
Moves the cursor line by line.
To move the cursor page by page.
Moves the cursor to the first block or to the end of the program.
The established last block remains active until it is canceled (with [ESC]) or a program is simulated; in that case, the execution of one of the functions "M02" or "M30" is set as the stop condition.
6.
| Program window (softkeys) |
CNC 8070
(SOFT V03.0X)
