
VERSION HISTORY
Here is a list of the features added in each software version and the manuals that describe them.
The version history uses the following abreviations:
INST | Installation manual |
PRG | Programming manual |
OPT | Operation manual |
Software V01.01 | February of 2002 |
First version.
Software V1.11September 2002
| Feature |
|
Probe management through a digital input. It is not possible to manage it through the | INST | |
“Counter” module connector. |
| |
Set the numbering of the digital I/O. | INST | |
Kinetics for rotary table. | INST | |
Possibility to park and unpark SERCOS axes from the PLC. | INST | |
Keyboard simulation from the PLC. | INST | |
New treatment of the JOG panel (Key + Direction). | INST / OPT | |
New machine parameters. | INST | |
• | Probe setting. |
|
• | Numbering of the digital I/Os. |
|
• | Kinetics for rotary table. |
|
• | Repositioning feedrate after a tool inspection. |
|
New variables. | INST | |
• | Probe setting. | PRG |
• | Numbering of the digital I/Os. |
|
• | Key simulation. |
|
• | Repositioning feedrate after a tool inspection. |
|
• | General scaling factor. |
|
• | Kinetics dimensions. |
|
General scaling factor (#SCALE). | PRG | |
Pobring canned cycles (#PROBE). | PRG | |
Probe selection (#SELECT PROBE). | PRG | |
Programming of warnings (#WARNING). | PRG | |
Block repetition ($RPT). | PRG | |
Improved programming of high speed machining (#HSC). | PRG | |
Improved programming of axis swapping (#SET AX, #CALL AX, #FREE AX, #RENAME). | PRG | |
Macros: The number of macros in a program is now limited to 50. | PRG | |
Improved tool table. | OPT | |
Protection passwords. | OPT | |
Jog mode. Tool calibration with or without probe. | OPT | |
Jog mode. Automatic loading of zero offsets table. | OPT |
CNC 8070
(SOFT V03.0X)
V