
Operating manual
9.4.1Changing the tool of the spindle
It is possible to change the tool of the spindles from the active tools panel. The tool to be placed must be defined in the tool table.
To change the active tool, follow these steps.
1.Use the cursor to select the active tool to be modified and enter the number of the new tool.
2.Press the [CYCLE START] key to load the tool automatically or the [ENTER] key to update the positions list after a manual tool change.
3.The tool list will show that the tool is in the spindle.
9.
MAGAZINE TABLE | |
TOOL AND |
|
CNC 8070
(SOFT V03.0X)
191