Operating manual
6.
| Program window (softkeys) |
6.7Program window (softkeys)
6.7.1First block
It sets as the first simulation block, the block where the cursor is. When not setting the first block, the simulation will begin at the first block of the program.
The last block may be selected using the cursor or the "Find text" or "Go to line" options of the softkey menu.
Keys to move the cursor
Moves the cursor line by line.
To move the cursor page by page.
Moves the cursor to the first block or to the end of the program.
The first block defined, remains active until canceled (with [ESC]) or until the program is simulated; in that case, the first block of the program will become the first block of the simulation.
CNC 8070
(SOFT V03.0X)
128
