‡‡ ‡ Operation manual

11.1Appearance of the PLC mode

11.

PLC

mode

 

Appearance of the PLC

When this operating mode is active, it will be indicated at the top right side of the general status bar.

This operating mode may be displayed with several screens. Each of them corresponds to a PLC service. The exchange between the different services is carried out with the list of services.

The different services overlap each other. If several services active, it is possible to switch from one to another using the relevant key, if it has been set accordingly. The services are switched in a rotary manner, in such a way that when pressing on the last active service, it shows the first one.

Standard configuration

The standard configuration of this work mode, described in this manual corresponds to the one supplied by Fagor. In some cases, the manual shows a sample screen, instead of that of the CNC in order to make it easier to understand.

8070 CNC

(SOFT V03.0X)

218

Page 252
Image 252
Fagor America CNC8070 manual Appearance of the PLC mode, Plc