
Operating manual
3.
AUTOMATIC MODE | Graphic screen (softkeys) |
CNC 8070
(SOFT V03.0X)
3.5.7Colors
It is used to change the colors used in the graphic representation.
Path colors. When a line graphics is active, the following colors may be defined: The color to draw the rapid traverse.
The color to draw the canned cycles. The color to draw the compensated path. The color to draw the theoretical path.
The color to draw the threading.
The color to represent the real coordinates. The real coordinate is the actual position of the tool which differs from the command coordinate in the amount of following error (axis lag).
The background color of the window.
Colors for solids. When a solid graphics is active, the following colors may be defined:
The color to draw the outside X.
The color to draw the inside X.
The color to draw the outside Y.
The color to draw the inside Y.
The color to draw the outside Z.
The color to draw the inside Z.
The background color of the window.
When selecting this option, the softkey menu shows the available options. To return to the main menu, press the key for the previous menu.
Colors "Apply"
It assumes the new colors and applies them to the blocks drawn next. If the new colors are not applied, the graphics are drawn with the old colors.
Colors "Edit"
It is used to select the new colors for the graphics. They are selected in the dialog area of the graphic window that show the current colors.
Keys for defining colors
To move the cursor through the data.
To open and close the color palettes.
To move the cursor through the colors of the palette.
To cancel the selected colors.
54