Fagor America CNC8070 manual Customizing Save always & Not always

‡ ‡ ‡ Operation manual

11.

PLC	(softkeys)
	Program editing

8070 CNC

(SOFT V03.0X)

11.4.6 Customizing

It is used for personalizing the appearance and properties of the editing window.

When selecting this option, the softkey menu shows the available options. To return to the main menu, press the key for the previous menu.

Customizing "Appearance" (looks)

It is used for personalizing the look of the different elements of the editing window and the colors of the elements of the program.

When selecting this option, the CNC shows the dialog box with two panels. The first one has the elements of the editing window that may be customized and the second one those of the program. The panel is selected by the key combination [CTRL]+[TAB].

Set aspect

B

A

C

B

To move the cursor through the elements of the list.

To select an option of a group (A).

To turn on/off the checkboxes (C), and to open/close the drop lists

(B).

After defining the new look, use the cursor to select one of the buttons here below to accept or ignore the changes made and press [ENTER].

ABC

(A)To accept the changes and close the dialog box.

(B)To ignore the changes and close the dialog box.

(C)To apply the changes and close the dialog box.

The dialog box may also be closed directly without accepting the changes by pressing [ESC].

Customizing "Save always" & "Not always"

It is used to save the program automatically or manually.

•When "auto-save" is on, the CNC will automatically save the program after every change.

•When "manual save" is active, the user must save the program (as explained in the "11.4.2 File" section of this chapter).

228