‡ ‡ ‡ Operating manual

4.2.5Coordinate preset

Coordinates must be preset axis by axis following these steps:

1.Select the axis to be homed using the alphanumeric keyboard. The CNC will highlight that axis to indicate that it is selected.

To select the numbered axes (e.g. "X1"), select any axis and then move the selection until positioning on the desired one. The focus moves with the [©][ª] keys.

2.Key in the desired preset value.

3.Press [START] to preset the entered value or [ESC] to cancel the operation.

The preset may be canceled by homing the axes one by one or by means of function "G53".

4.

(JOG) MODE

with the axes

MANUAL

Operations

CNC 8070

(SOFT V03.0X)

73

Page 107
Image 107
Fagor America CNC8070 manual Coordinate preset