‡ ‡ ‡ Operating manual

Softkey menus of the graphics window

When selecting the graphic window, the horizontal softkey menu shows the options associated with that window. The set of options offered by this menu may be changed using the "+" softkey which offers a new set of options.

The options available in the softkey menu are the following. See "6.5 Graphic window (softkeys)" on page 117.

‡"Type of graphics"

To select the type of graphics.

‡"ZOOM"

To enlarge or reduce the whole graph shown or part of it.

‡"Dimensions"

To define the size of the graphic representation.

‡"Point of view"

To change the point of view of the graph and show it from another perspective.

‡"Measurement"

To measure the distance between two points.

‡"Clear screen"

It is used to clear the screen or delete the graphics displayed.

‡"Colors"

To set the appearance of the graphics on display.

‡"Options"

To set the appearance and some options of the graphic window.

‡"Speed"

To change the simulation speed.

6.

-SIMULATION MODE

Graphics window

EDITING

 

CNC 8070

(SOFT V03.0X)

113

Page 147
Image 147
Fagor America CNC8070 manual 113