![](/images/new-backgrounds/1111071/111071173x1.webp)
Operating manual
3.5.5Measurement
To measure the distance between two points. This option is only available for the types of graphics "XY", "XZ", "YZ" and "Solid 3D".
When selecting this option, the section being measured will appear on the graphics with two cursors and a dashed line. The cursor currently selected will appear in red.
Keys to move the cursors
To move the selected cursor.
To select the cursor to be moved.
The dialog area will show the coordinates of both cursors, the distance between them on the straight line and the components of that distance on the axes of the active plane. The coordinates of the selected cursor will appear in red.
When selecting this option, the softkey menu shows the available options. To return to the main menu, press the key for the previous menu.
Measurement "Point1" & "Point2"
It is used to select the cursor to be moved (same as using the "+" key).
Measurement "Edit"
It is used to manually edit the position of the cursors. It is edited in the dialog area of the graphic window that shows the position of both cursors.
Keys for defining the measurement
To move the cursor through the data.
To validate the selected position of the cursors.
3.5.6Clear screen
It is used to clear the screen or delete the graphics displayed.
If a solid graphic type is selected, the graphic representation will be reset and it will return to its initial state without machining.
3.
AUTOMATIC MODE | Graphic screen (softkeys) |
CNC 8070
(SOFT V03.0X)
53