Operating manual
Recall the tables
It may be used to restore the data, in ASCII format, of the tables from the files. The tables may be loaded one by one or all of them simultaneously. In either case, the action is carried out from the vertical softkey menu using one of the following icons.
Loading all the tables at the same time.
To load all the tables at the same time, no table must be selected. See "9.1.1 Table selection" on page 172.
Loading each table separately.
To load the tables one by one, select each table from the horizontal softkey menu. To load the data of all the tables (recommended), follow a particular loading order to guarantee data consistency.
After pressing the icon, the CNC will ask the location of the data files. Select the desired folder and press [ENTER]. The selection process may be canceled by pressing the [ESC] key.
Order (sequence) to follow when loading the different tables.
As mentioned earlier, there are two ways to load the table data from the ASCII files; loading all of them at the same time or selecting each table and loading its data.
Loading all the tables at the same time.
In this case, it is up to the CNC to set the order (sequence) used to load the data.
Order (sequence) to follow when loading the tables one by one.
This way, each table is selected and its data loaded. In this case, the following sequence must be followed when loading the tables.
1.First load the tool table.
This table defines the system tools. Loading the tool table initializes the tables of the magazines and the
2.Second, load the tool magazine tables.
Since the tool list has changed, if the magazine tables are not loaded, it is not possible to assure that the new tools are the ones located in the magazine tool or in the
3.Finally, load the
When loading the tables of magazines, it is unsure that the current tool positions will be compatible with the active tools.
9.
MAGAZINE TABLE | common operations |
TOOL AND | Showing tables and |
CNC 8070
(SOFT V03.0X)
175
