Operating manual
13.1.4 Machine parameter editing
Here is a list of machine parameters and variables of the drive that may be modified from the oscilloscope.
The new values are assumed by the CNC after pressing [ENTER] and they are maintained until the unit is turned off. Once the setup is completed, the changes must be saved so they can be effective next time the CNC is turned on.
Use the VALIDATE softkey to save the data. The CNC saves the new values in the CNC tables and/or in the drive tables accordingly.
Axis or spindle machine parameters that may be edited
The table indicates the parameters that will be assumed at the beginning of the next block. For this to be so, the instruction "#SYNC POS" must be programmed after each motion block.
CNC | Drive | Associated variable | Update |
|
|
|
|
PRELOAD |
| MPG.PRELOAD[tandem] | Immediate |
|
|
|
|
PRELFITI |
| MPG.PRELFITI[tandem] | Immediate |
|
|
|
|
TPROGAIN |
| MPG.TPROGAIN[tandem] | Immediate |
|
|
|
|
TINTIME |
| MPG.TINTIME[tandem] | Immediate |
|
|
|
|
TCOMPLIM |
| MPG.TCOMPLIM[tandem] | Immediate |
|
|
|
|
INPOSW |
| MPA.INPOSW.[set].axis | Immediate |
|
|
|
|
BACKLASH | PP58 | MPA.BACKLASH.[set].axis | Immediate |
|
|
|
|
G00FEED |
| MPA.G00FEED.[set].axis | Beginning of next block |
|
|
|
|
MAXVOLT |
| MPA.MAXVOLT.[set].axis | Immediate |
|
|
|
|
PROGAIN | PP104 | MPA.PROGAIN.[set].axis | Immediate |
|
|
|
|
FFGAIN | PP216 | MPA.FFGAIN.[set].axis | Immediate |
|
|
|
|
MANFFGAIN | PP216 | MPA.MANFFGAIN.[set].axis | Immediate |
|
|
|
|
ACFWFACTOR |
| MPA.ACFWFACTOR.[set].axis | Immediate |
|
|
|
|
ACFGAIN | PP217 | MPA.ACFGAIN.[set].axis | Immediate |
|
|
|
|
MANACFGAIN | PP217 | MPA.MANACFGAIN.[set].axis | Immediate |
|
|
|
|
LACC1 |
| MPA.LACC1.[set].axis | Beginning of next block |
|
|
|
|
LACC2 |
| MPA.LACC2.[set].axis | Beginning of next block |
|
|
|
|
LFEED |
| MPA.LFEED.[set].axis | Beginning of next block |
|
|
|
|
ACCEL | PP42 | MPA.ACCEL.[set].axis | Beginning of next block |
|
|
|
|
DECEL | PP42 | MPA.DECEL.[set].axis | Beginning of next block |
|
|
|
|
ACCJERK |
| MPA.ACCJERK.[set].axis | Beginning of next block |
|
|
|
|
DECJERK |
| MPA.DECJERK.[set].axis | Beginning of next block |
|
|
|
|
ESTDELAY |
| MPA.ESTDELAY.[set].axis | Immediate |
|
|
|
|
SERVOOFF |
| MPA.SERVOOFF.[set].axis | Immediate |
|
|
|
|
MINANOUT |
| MPA.MINAOUT[.set].axis | Immediate |
|
|
|
|
BAKANOUT | PP2 | MPA.BAKANOUT.[set].axis | Immediate |
|
|
|
|
BAKTIME | PP3 | MPA.BAKTIME.[set].axis | Immediate |
|
|
|
|
If the machine parameters are protected, when accessing any of them, the CNC will display a window requesting a password.
13.
ASSISTANCE | Oscilloscope |
SETUP |
|
CNC 8070
(SOFT V03.0X)
277
