Operation manual
11.4.3Undo
11.
PLC | (softkeys) |
| Program editing |
To "undo" the last modifications made. The modifications are undone one by one starting from the most recent one.
11.4.4 Operations with blocks
It is used to copy, cut and paste the information of a block or set of blocks and export this information as an independent program.
This option is only available when there is a text selected in the program or on the clipboard. To select a text in the program, keep the [SHIFT] key pressed while moving the cursor.
When selecting this option, the softkey menu shows the available options. To return to the main menu, press the key for the previous menu.
Operations with blocks "Copy"
It copies the selected text onto the clipboard.
Operations with blocks "Cut"
Copies the selected text onto the clipboard and deletes it from the program.
Operations with blocks "Paste"
Pastes the contents of the clipboard into the program.
Operations with blocks "Copy to program"
Saves the selected texts as an independent program.
When selecting this option, the CNC shows a list of the available programs. To save the text as a program:
1.Select the destination folder.
2.Define the file name at the bottom window. To replace an existing file, select it from the list.
3.Press [ENTER] to save the program or [ESC] to cancel the selection and close the program listing.
8070 CNC
(SOFT V03.0X)
