Operating manual
Option "Print setup"
It is used to set the printing configuration.
When selecting this option, the CNC shows a dialog box where the following may be defined:
A. The title of the graphics that will appear next to it in the print.
B. The name of the file where the graphics will be stored when printing out to a file.
Print configuration
A
B
To move the cursor through the elements of the list.
To accept the configuration defined.
To cancel the defined configuration.
After filling out the data, press [ENTER] to accept them or [ESC] to cancel them.
6.5.9Speed
To change the simulation speed.
When selecting this option, the softkey menu shows the options to set the simulation speed. To return to the main menu, press the key for the previous menu.
Speed "Edit"
It is used to select the new simulation speed. It is selected using the graduated ruler that indicates the active simulation speed.
Keys for defining the measurement
To move the ruler cursor.
6.
| Graphic window (softkeys) |
CNC 8070
(SOFT V03.0X)
125
