Operating manual
3.3Data screen (softkeys)
3.3.1First block
It sets the block currently selected with the cursor as the first block to begin execution. When not setting the starting block, the program will begin executing from the first block.
The last block may be selected using the cursor or the "Find text" or "Go to line" options of the softkey menu.
Keys to move the cursor
Moves the cursor line by line.
To move the cursor page by page.
Moves the cursor to the first block or to the end of the program.
The first block being set remains active until it is canceled (using the [ESC] key) or until the program is executed; in that case the first block of the program will be assumed as the first block.
3.
AUTOMATIC MODE | Data screen (softkeys) |
CNC 8070
(SOFT V03.0X)
41
