Operating manual
6.9.7Modify a profile and insert corners
To modify the defined profiles by either modifying or deleting the existing elements or inserting new elements. Likewise, it is possible to insert rounding, chamfers and tangential entries or exits.
When selecting this option, the softkey menu will show the necessary options to modify the profile.
Modify element
It is possible to modify any data of a section of the profile.
Once the desired element has been selected, one may modify the type of section (straight or arc) or its data. Once the element has been modified, press "Validate" to confirm the changes.
The CNC recalculates the new profile according to the data used to define that section and the next one (tangency, angle, etc.)
Insert element
To insert a new element in any position of the profile.
After selecting the section after which the element is to be inserted, select the type of section (straight or arc) to be inserted, define its parameters and press the "Validate" softkey.
The CNC recalculates the new profile according to the data used to define that section and the next one (tangency, angle, etc.)
Delete element
To delete an element of the selected profile.
Once the element to be deleted has been selected, confirm the command by pressing [ENTER].
The CNC recalculates the new profile.
Corners
To include rounding, chamfers, tangential entries or exits in the defined profile. See "Corner definition" on page 144.
Additional ISO
For adding an ISO coded line to a previously closed profile.
Once the ISO coded line to be added has been entered, confirm the command by pressing the [ENTER] key.
6.
Profile editor | |
EDITING |
|
CNC 8070
(SOFT V03.0X)
143
