Fagor America CNC8070 manual Profile editor. Example, End of editing

‡‡ ‡ Operating manual

6.9.11Profile editor. Example 1

6.

-SIMULATION MODE	Profile editor
EDITING

CNC 8070

Profile definition without rounding, chamfers or tangential entries and exits.

Starting point	X = 80	Y =-20
Straight	X = 80	Y =20
Straight	X = 20	Y =20
Straight	X = 20	Y =80
Straight	X = 60	Y =80
Counterclockwise arc	X = 100	Y =80	Center X = 80	Center Y = 80	Radius = 20
Straight	X = 140	Y =80
Straight	X = 140	Y =20
Straight	X = 80	Y =20
Straight	X = 80	Y =-20

Definition of rounding, chamfers and tangential entries and exits

Select the "CORNERS" option and define:

Tangential entry	Select point "1"	Assign radius = 5	Press [ENTER]
Chamfer	Select point "2"	Assign size = 10	Press [ENTER]
Rounding	Select point "3"	Assign radius = 10	Press [ENTER]
Rounding	Select point "4"	Assign radius = 5	Press [ENTER]
Rounding	Select point "5"	Assign radius = 5	Press [ENTER]
Rounding	Select point "6"	Assign radius = 10	Press [ENTER]
Chamfer	Select point "7"	Assign size = 10	Press [ENTER]
Tangential exit	Select point "1"	Assign radius = 5	Press [ENTER]

Press [ESC] to quit the "CORNER" option.

End of editing

Select the "END" option and save the profile. The CNC quits the profile editor and inserts the profile in the part-program.

(SOFT V03.0X)

148