
Operation manual
11.13.1 Options of the "Messages" service (softkeys)
Save
It saves the message and error table into a file in ASCII format (*.MEF).
The contents of the table may be saved at the CNC, in a floppy disk or in another CNC (or PC) via Ethernet.
Load
It recovers the table values saved earlier in the hard disk of the CNC.
It prints the message and error table out to a printer connected to the CNC or as a file (*.PRN format) at the CNC.
New message
It is used to define a new message in the table.
11.
PLC | service |
| "Messages" |
New error
It is used to define a new error in the table.
Select information
It selects the file for additional information.
Delete
It deletes the selected message or error from the table.
8070 CNC
(SOFT V03.0X)
249