Operating manual
When accessing the profile editor, the softkey menu shows the following options:
Edit
To select the type of profile to be edited. Also too enlarge a profile, import a profile saved in DXF format.
Modify
To modify, insert or delete elements of a profile.
Displayed area
To modify the zoom of the graphics area.
Plane
To select the axes of the plane and their direction.
End
It ends the profile editing session. Before exiting the profile editor, it will offer the option to save or not the edited profile.
Undo
To "undo" the last operation made.
Save and continue
To save the profile and continue editing. Using this key does not require that the profile be completed.
If the profile has been resolved, the CNC will insert it in the part program that is being edited. If the profile cannot be resolved due to lack of data, the CNC will issue the relevant message.
6.
Profile editor | |
EDITING |
|
CNC 8070
(SOFT V03.0X)
