‡ ‡ ‡ Operating manual

3.5.8Options

It is used to set the appearance and some functions of the graphic window. These options may be used at any time, even while executing a program.

When selecting this option, the softkey menu shows the available options. To return to the main menu, press the key for the previous menu.

Option "Activate" / "Deactivate"

It is used to activate or deactivate the graphic representation.

When the graphic representation is deactivated and activated, the current graphic is erased; but the display conditions are kept active (type of graphics, zoom, graphic parameters and display area) that were active before that mode was deactivated.

Option "Simple" / "Combined"

It is used to hide or show the dialog and data areas on the right-hand side of the graphic window so the drawing occupies the whole graphic window.

Option "Hide Tool" / "Show Tool"

It is used to hide or show the tool while executing in "3D solid" graphics.

Option "Print"

It is used to print the graphics in a printer connected to the CNC or as a file (BMP format) at the CNC. When printing to a file, it is saved in the folder:

"C:\Cnc8070\Users\Reports\*.bmp"

When selecting this option, the CNC will show a dialog box requesting the print destination (printer or file).

Print destination

To select the print destination.

To print the drawing.

To cancel the printing.

3.

AUTOMATIC MODE

Graphic screen (softkeys)

After selecting the destination, press [ENTER] to print it or [ESC] to cancel it.

CNC 8070

(SOFT V03.0X)

55

Page 89
Image 89
Fagor America CNC8070 manual Options