Fagor America CNC8070 Options of the Cross reference service softkeys, Inputs, Outputs, Marks

‡ ‡ ‡ Operation manual

11.11.1 Options of the "Cross reference" service (softkeys)

When accessing the "Cross reference" service, the softkey menu will offer the following options:

Inputs

It shows information about the inputs.

Outputs

It shows information about the outputs.

Marks

It shows information about the marks.

Registers

It shows information about the registers.

Timers

It shows information about the timers.

Counters

It shows information about the counters.

Print

It is used to print the cross reference tables out to a printer connected to the CNC or as a "*.PRN" file at the CNC. When printing to a file, it is saved in the folder:

"C:\Cnc8070\Users\Reports\*.prn"

When selecting this option, the CNC shows a dialog box requesting the destination for the file (printer or file). When printing to a file, it is possible to select the name and location of the file.

11.

PLC	service
	"Cross references"

Print destination

To select the print destination.

To print the drawing.

To cancel the printing.

After selecting the destination, press [ENTER] to print the table or [ESC] to cancel it.

8070 CNC

(SOFT V03.0X)

245