Operating manual
13.1.2 Configuration screen
The configuration screen may be accessed with the horizontal softkey "CONFIG".
This screen looks like this with two clearly different areas. The left side shows the data of the variables to be displayed, the trigger data and the time base. The right side shows the parameters to be acted upon and the amount to increase/decrease the values of those parameters.
13.
ASSISTANCE | Oscilloscope |
SETUP |
|
Selection of the variables to be displayed, trigger and time base
It is the area where the user selects the variables to be displayed at the graphics window, the trigger options and the time base. Up to 4 variables may be displayed at the same time.
When typing the name of any variable incorrectly, the CNC will show the error "Access denied".
Besides the trigger data and the base time, this window may be used to select the color used to display the variable and whether it will be visible or not.
Parameter selection and increase/decrease
It is the area where the user selects the parameters upon which to act. To the right of each parameter, there is a square used to increase/decrease of its value.
This way, when the focus is on the value of a variable on the main screen, pressing the vertical softkey "V+" will increase the parameter value in the amount set on the configuration screen.
By default, the increase/decrease value of a parameter is initialized to 1.
CNC 8070
(SOFT V03.0X)
275
