Operating manual
|
| X Y | |
6. |
| Center X | |
| Center Y | ||
|
| ||
SIMULATION- MODE | Profile editor | Radius | |
Tangency | |||
Validate | |||
|
| ||
EDITING |
| X1, Y1 | |
|
| ||
|
| X2, Y2 | |
|
| Xc | |
|
| Yc | |
|
| RADIUS | |
|
| TANGENCY |
CNC 8070
(SOFT V03.0X)
Definition of a curved section (clockwise or counterclockwise)
To define a curved section, the softkey menu shows the necessary options to define the data for the section.
To define the section's end point.
To define the arc's center coordinate along the abscissa axis.
To define the arc's center coordinate along the ordinate axis.
To define the arc radius.
To define whether the section is tangent to the previous path.
To accept and draw the defined section.
The data is defined in the data area of the screen where the following information is shown:
Coordinates of the section's starting point. They cannot be modified because they belong to the endpoint of the previous section.
Coordinates of the section's endpoint.
Coordinates of the section's center along the abscissa axis.
Coordinates of the section's center along the ordinate axis.
Radius of the arc.
It indicates whether or not the section is tangent to the previous path.
142
