Operating manual
6.3.6Customizing
To customize the appearance and the properties of the editing window.
When selecting this option, the softkey menu shows the available options. To return to the main menu, press the key for the previous menu.
Customizing "Appearance" (looks)
It is used for personalizing the look of the different elements of the editing window and the colors of the elements of the program.
When selecting this option, the CNC shows the dialog box with two panels. The first one has the elements of the editing window that may be customized and the second one those of the program. The panel is selected by the key combination [CTRL]+[TAB].
Set aspect
B
A
C
B
To move the cursor through the elements of the list.
To select an option of a group (A).
To turn on/off the checkboxes (C), and to open/close the drop lists
(B).
After defining the new look, use the cursor to select one of the buttons here below to accept or ignore the changes made and press [ENTER].
ABC
(A)To accept the changes and close the dialog box.
(B)To ignore the changes and close the dialog box.
(C)To apply the changes and close the dialog box.
The dialog box may also be closed directly without accepting the changes by pressing [ESC].
Customizing "Auto-Save / Manual save"
It is used to save the program automatically or manually.
•When
•If "Manual save" is active, it is up to the operator to save the program. See "6.3.2 File" on page 103.
6.
| Editing window (softkeys) |
CNC 8070
(SOFT V03.0X)
107
