Siemens SITRANS FUS1010 NEMA-4X/ IP 65 manual Manual Addendum 1010FMA-14, Introduction

Manual Addendum 1010FMA-14

EXPANDED I/O OPTION

(For Systems Equipped With 1010N-7 Modules)

INTRODUCTION

The 1010N-2 I/O Module and 1010N-7 Expanded I/O Module both provide current (Io1, Io2), voltage (V01 and Vo2) and pulse rate (Pgen 1 and Pgen 2) analog outputs. The Expanded I/O Module Option allows users to drive as many as four additional 4-20 mA loop-powered instrumentation outputs. The following information is intended to be used with the I/O Data Control and Span Data sections and Analog Output Trim Menu in the field manual.

The System 1010 flowmeter provides an Analog Output Setup menu (see below) that allows the user to assign data functions for these output signals (refer to Analog Output Setup in the appropriate 1010 field manual). In addition, refer to Installation Drawings 1010N-2-7 and 1010N-7-7 in the field manual appendices for additional connection information and terminal block numerical designators.

NOTE: All meters in the System 1010N and DN product family can accept the Expanded I/O Module Option except 4-Channel meters.

Use this menu to assign data functions to analog outputs.

Siemens Dual Path SITE1

Assign Data to Analog Outputs

Analog Out Setup

Relay Setup

Analog Input Setup

I/O Data Control

EXPANDED I/O MODULE OPTION

The Expanded I/O Module Option provides expanded Io analog outputs. It is implemented through the use of a 1010N-7 Expanded I/O Module occupying the same position as the 1010N-2 I/O Module. This option allows users to drive up to four additional 4-20mA loop-powered instrumentation outputs. Note that the meter menu does not indicate that these supplementary outputs are present and available. The outputs, in addition to being loop-powered, are isolated from one another as well as the meter.

Expanded I/O Module Option Identification

To verify that your meter has the Expanded I/O Module Option installed check the following:

The designation A1 should be part of the flowmeter part number.

For example: 1010ENRE-T1A1KGS

1 May 2002