Section 2 | ||
|
|
|
NOTE: In single channel 1010’s the datalogger uses a compression scheme that precludes backward scrolling.
Important point about Datalogger resources and
When logging data on both measurement channels simultaneously, the Datalogger stores reports in a single common file. It is important that you select Site ID to appear on each line of data so that you can always identify which channel generated report.
2.10THE I/O DATA CONTROL MENU
This menu becomes available after picking a Meter Type and Channel.
Use this menu to assign functions for the meter’s analog outputs and optional inputs. The Analog Out Setup assigns functions to the meter’s current, voltage and pulse rate outputs. Each menu cell pre- sents an option list of the available data items. In addition, you can set up the alarm relays, enable and span the analog input ports.
Use this menu to assign data functions to analog outputs.
Use this menu to assign alarm functions to relay outputs.
Siemens | Dual Path | SITE1 |
Assign Data to Analog Outputs
Analog Out Setup
Relay Setup
Analog Input Setup 
Use this menu to enable and span optional analog inputs.
I/O Data Control
