Siemens SITRANS FUS1010 NEMA-4X/ IP 65 manual Application Info Menu, Liquid Data Menu

Section 2 1010NFM-3J

2.11.3 THE APPLICATION INFO MENU

This menu provides a live display of the basic timing data used by meter during operation.

		Siemens	2 Channel [1]		1
		Time between transit and receive
		TN uSec		75.193
		TL uSec		44.009
		DeltaT uSec		126
		Burst/Sec		256
		% Accepted		100
		Last Makeup		(Re)Start
		Makeup Status		Measurement
		Application Info
	APPLICATION INFO MENU ITEMS
TN uSec	The total elapsed time between the transmission and reception of a sonic pulse.
TL uSec,	The total time a sonic pulse takes to travel through the liquid.
DeltaT nSec	This is the instantaneous result of subtracting the down from the up transit times.
	NOTE: This will appear to be more active than dampened flow readings.
Burst/Sec	Number of transmissions per second under current operating conditions.
	The following factors influence this parameter: aeration, pressure transients,
	signal strength variation.
% Accepted	The running tally of accepted and rejected up/down transmit burst sets.
Last Makeup	Reason for last Makeup (signal reacquisition).
Makeup Status	Current stage of Makeup routine. [Measurement = normal operation]

2.11.4 THE LIQUID DATA MENU

This menu shows the current Reynolds number used by the meter to implement flow profile compen- sation. Depending on the 1010 model, Temp 1 & 2, Viscosity cP, Viscosity cS and Pressure are also offered.

LIQUID DATA MENU ITEMS

Temp 1	Current Liquid Temperature
Temp 2	Current Liquid Temperature
Reynolds #	Current Reynolds number
Specific Gravity	Current specific gravity
Viscosity cP	The absolute viscosity of a liquid dynamically measured in centipoise.
Pressure	Derived spanned from analog input.
Viscosity cS	Kinematic viscosity of a liquid measured in centistokes.

2-67